MARINE TOILET SEALOCK
Manual toilet for sailing- and motorboats

The RM sealock toilet, which can be installed below and above the waterline, is the logical successor of the RM standard toilet, for many years well known all over the world. The in- and outlet of the RM SEALOCK toilet can, contrary to other marine toilets, completely locked, if the toilet is not being used. This gives extra security against incoming water, especially when the toilet is installed below the waterline. The sealock toilet is supplied with a self priming handpump which, depending of the space available, can be installed at the right or left side of the bowl. The sealock toilet can be supplied with standard or household type porcelain bowl and white plastic or wooden seat and cover. All parts are made of corrosion resistant materials.

Note:
Faulty hoses or blockage between toilet and seasocks can also cause flooding. Therefore RM69 advises to close your seasocks when not on board or at sleep.

 

Material bowl
Material pump and base
Diameter inlet
Diameter outlet

Porcelain
ABS
¾” (20 mm)
1 ½” (38 mm)

Technical drawning

(click here)
011
012
013
Sealock toilet
Sealock toilet
Sealock toilet
- standard bowl
- standard bowl
- household type bowl

- ABS seat and cover, white
- Wooden seat and cover, white
- Wooden seat and cover, white

 

Buffertank 25 ltr. (click here)
Waste holding tank 90 ltr. (click here)
Waste holding tank 30 ltr. (click here)
Wastetanks 40, 50, 60 & 80 ltr. (click here)
Split-up valves (click here)
Non return valve (click here)
Seat saver (click here)